It is necessary to clean the spots on a machine to prevent rust and cross-contamination.
The cleaning operation entails eliminating any remaining product and material build-up from the whole mixing tank. The mixing shaft will be cleaned with water to do this.
The horizontal mixer is then cleaned from top to bottom. Cleaning nozzles are either permanently welded to the inside of the socket or can be used as a separate cleaning adapter on the device.
The rinsing water used to clean the outlets is collected in the mixing container and then used to clean the interior of the mixer, which requires a cleaning agent.
The mixing shaft is used to clean the mixing tank. It rotates back and forth, ensuring intense and turbulent contact between the mixer’s inner surface and the cleaning agent. Any product residue left in the mixer can be absorbed if necessary, during this step.
It is important to finish drying the mixer with conditioned ambient air. Blowing out the entire system with heated compressed air or using blowers in combination with absorption dryers has been shown to be effective.
Post time: Jul-11-2022